EasyManuals Logo

Onkyo HT-R990 User Manual

Onkyo HT-R990
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Connection Tips and Video Signal Path
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your components. Use the following sections as a guide.
Video component can be connected by using any one of the
following video connection formats: composite video, PC IN
(Analog RGB), component video or HDMI, the latter
offering the best picture quality.
Video input signals flow through the AV receiver as shown,
with composite video, PC IN (Analog RGB) and component
video sources all being upconverted for the HDMI output.
The composite video and component video outputs carry
their respective input signals as they are.
When you connect a video component to an HDMI or
COMPONENT input, you must assign that input to an input
selector (_ page 42).
For optimal video performance, THX recommends that video
signals pass through the system without upconversion (e.g.,
component video input passing through to component video output).
mSignal Selection
It signals are present at more than one input, the inputs will
be selected automatically in the following order of priority:
HDMI, component video, composite video.
However, for component video only, regardless of whether a
component video signal is actually present, if a component
video input is assigned to the input selector, that component
video input will be selected. And if no component video input
is assigned to the input selector, this will be interpreted as no
component video signal being present.
In the Signal Selection Example shown on the right, video
signals are present at both the HDMI and composite video
inputs. However, the HDMI signal is automatically selected
as the source and the video is output by the HDMI output.
Video Signal Flow Chart
I Blu-ray Disc/DVD player, etc. I
Composite
AV receiver
PC IN Component HDMI
(Analog RGB)
Composite
H®_|O = I
Component HDMI
TV, projector, etc.
Signal Selection Example
I Blu-ray Disc/DVD player, etc. I
Composite Component HDMI
AV receiver
0 O" 0
Composite Component HDMI
TV, projector, etc.
ED
79

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-R990 and is the answer not in the manual?

Onkyo HT-R990 Specifications

General IconGeneral
BrandOnkyo
ModelHT-R990
CategoryReceiver
LanguageEnglish

Related product manuals