To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-RC470 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| Dolby Atmos | No |
| DTS:X | No |
| 4K Passthrough | Yes |
| 3D Support | Yes |
| Internet Radio | Yes |
| AirPlay | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity and Impedance | 200 mV/47 kΩ |
| Bluetooth | No |
| Wi-Fi | No |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Network Connectivity | Ethernet |
| Signal-to-Noise Ratio | 100 dB |
| Audio Inputs/Outputs | 1 Optical, 1 Coaxial |
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven) |
| Dimensions (W x H x D) | 435 x 173.5 x 328 mm |
| Weight | 20.3 lbs (9.2 kg) |
Essential safety guidelines to prevent hazards while using the apparatus.
Important notes on handling, power, and usage to ensure safe operation.
Guidance on connecting the AV receiver to speakers and other audio components.
Instructions for connecting speaker cables, including terminal types and polarity.
Steps for connecting external devices via HDMI for audio and video transmission.
Guide to connecting various AV components to the receiver's input jacks.
Guide through the first-time setup process, including language and speaker calibration.
Step-by-step guide to programming remote control codes into the AV receiver.
Solutions for common problems encountered during operation and setup.
Methods and procedures for updating the AV receiver's firmware via network or USB.
