Onkyo HT-S3910DAB User Manual

27
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 3.1.2 Channel System
12
6
34
5
This is a combination of the 3.1 Channel System and front high speakers. A front high speaker is a type of height speaker.
You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers Installation Example ( p22)
❏ Ceiling Speakers Installation Example ( p23)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p24)
 "Speaker Setup" settings during
Initial Setup ( p87)
Speaker Setup
Select how many speakers you have.
Next
ENTER
Speaker Channels 3.1.2 ch
Yes
Subwoofer
Front HighHeight Speaker
• Speaker Channels: 3.1.2 ch
• Subwoofer: Yes
• Height Speaker: Select the
type of height speaker actually
installed.
• Speaker Impedance: Set any
value ( p25)
Setup
In order to optimize the sound eld
e󰀨ect, some settings must be made
in the Setup menu after the Initial
Setup is completed. Press on
the remote controller, then set
"2. Speaker" - "Distance"
( p75) and "Level Calibration"
( p76).When using separately
sold speakers, also set "2.
Speaker" - "Crossover"( p74).

Onkyo HT-S3910DAB Specifications

General

Brand	Onkyo
Model	HT-S3910DAB
Category	Home Theater System
Language	English