EasyManuals Logo

Onkyo HT S5100 User Manual

Onkyo HT S5100
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
78
Advanced Setup
—Continued
Note:
These settings cannot be changed while headphones
are connected or the multichannel DVD input is being
used.
Crossover Frequency
This setting only applies to the speakers that you speci-
fied as
Small
in the “Speaker Configuration” on page 77.
To get the best bass performance from your speaker sys-
tem, you need to set the crossover frequency according
to the size and frequency response of your speakers
Notes:
•For a more accurate setting, look up the frequency
response in the manuals supplied with your speakers
and set accordingly.
Choose a higher crossover frequency if you want more
sound from your subwoofer.
These settings cannot be changed while headphones
are connected or the multichannel DVD input is being
used.
7
Use the Down [ ] button to
select “SurrBack, and use the
Left and Right [ ]/[ ] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the surround back
speakers are small.
Large:
Select if the surround back
speakers are large.
None:
Select if no surround back
speakers are connected.
Notes:
If the Surround setting in step 6 is set
to None, or Powered Zone 2 is being
used, this setting does not appear.
If the Surround setting in step 6 is set
to Small, the Large option cannot be
selected.
8
Use the Down [ ] button to
select “SurrBack ch, and use the
Left and Right [ ]/[ ] buttons to
select
2ch
or
1ch
.
2ch:
Select if two (left and right)
surround back speakers are
connected.
1ch:
Select if one surround back
speaker is connected.
Note:
If the Surround or SurrBack settings
in steps 6 and 8 are set to None, this
setting does not appear.
Continue with step 9 of the “Crossover
Frequency” setting.
9
Use the Down [ ] button to
select “Crossover, and then use
the Left and Right [ ]/[ ] but-
tons to select a crossover fre-
quency.
Continue with step 10 of the “Double
Bass” setting on the next page.
This setting is set automatically by the Automatic
Speaker Setup function (see page 42).
HT-S5100En.book Page 78 Monday, May 19, 2008 1:47 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT S5100 and is the answer not in the manual?

Onkyo HT S5100 Specifications

General IconGeneral
BrandOnkyo
ModelHT S5100
CategoryHome Theater System
LanguageEnglish

Related product manuals