23
Lights when completed
EDIT / NO
YES
YES
1
2
3
4
Editing the contents of an MD
Combining tracks
You can combine two adjacent tracks into one.
Note, however, that you cannot combine an analog monaural track with
another type of track (e.g., recorded via analog stereo, Digital 1, Digital
2).
1. Turn the AMCS knob until the latter of the track numbers you
wish to combine is displayed.
• The selected track will be combined with the previous track.
• If each of the combined tracks has a title, the previous track's title
will remain and the latter track's title will be erased.
• If the previous track only has a title, that title will remain.
• If the latter track only has a title, that title will be lost.
2. Press the EDIT/NO button several times until "Combine?"
appears in the display.
• To stop combining tracks...
Press the EDIT/NO button again, or press the e STOP button.
3. Press the YES button.
Check the part of the two tracks to be combined.
The part of the two tracks combined will play repeatedly, with
"Rehearsal" and "Track Ok?" alternately shown on the display.
4. Press the YES button to combine the tracks you have selected.
• When the combining is completed, "Complete" appears in the
display.
• When tracks are combined, the tracks following those tracks are
advanced, each given a new number which is smaller by one track
than the previous track number. For example, if you combine track
3 with track 2, track 4 will now be renumbered as track 3; track 5
will now be renumbered as track 4, and so on.
Note:
• When "Protected" is shown on the display, it indicates that the
MD's record protect hole is open. Before editing the MD, close the
record protect hole.
• If the
indicator is lit or flashing, do not rock the unit or
unplug the power cord.
TRACK
231 45678910
11 12 13 14 15 16 17
L
R
-40 -30 -20 -10 -4 -2 0
-
SYNCLEVEL
DIGITAL IN
1
(PUSH ENTER)
qAMCSw
f
r EJECT
DISPLAY EDIT / NO YES
g PAUSE e STOP s PLAY
d
PHONES LEVEL
PHONES
REC LEVEL
MAXMIN
MINIDISC RECORDER
MD-2521
o REC
STANDBY
DIGITAL INPUT-2
STANDBY / ON
MEMORY CLEAR REPEAT RANDOM
INPUT TIMER
STEREO
MONO
ANALOG
DIGITAL-1
DIGITAL-2
DIGITAL-3
(COAXIAL)
OFF
REC PLAY
MAXMIN
DISC LOADING MECHANISM
3 DIGITAL INPUTS
x
c,v
z
TOC
78910
11 12 13 14 15 16
L
R
-40 -30 -20 -10 -4 -2 0
-
SYNCLEVEL
DIGITAL IN
1
Note, however, that you cannot combine an ana
type of track (e.g., recorded via analog stereo, D
To Next Page
Loading...
