Onkyo MD-2521

20
TIMER
OFF
REC PLAY
TIMER
OFF
REC PLAY
or
1
2
3
Timer operation
Using the Audio Timer
You can use a commercially available audio timer for recording and
playing.
1. Load an MD.
• When recording onto an MD which already contains program
material, the new contents will be recorded on the MD following
the existing tracks.
2. Set the timer switch of the MD-2521 to "REC" or "PLAY".
• Set the audio timer approximately 1 minute earlier than actually
you want to start recording. The MD recorder may require time to
write to and to read out the TOC after it is activated by the timer.
• For how to set your audio timer, see the instruction manual that
came with it.
3. Plug in the AC power cord of the MD-2521 to the audio timer.
• If the MD becomes full during recording, the recording will stop
immediately with the MD recorder entered in the STANDBY
mode.
• After using the audio timer for recording, be sure to energize the
MD recorder (by plugging in its AC power cord to a wall outlet or
the UNSWITCHED outlet of another system component) within 2
weeks. If the MD recorder is not energized during that period, the
recorded materials may be lost.
MD-2521
Timer
(PUSH ENTER)
qAMCSw
f
r EJECT
DISPLAY EDIT / NO YES
g PAUSE e STOP s PLAY
d
PHONES LEVEL
PHONES
REC LEVEL
MAXMIN
MINIDISC RECORDER MD-2521
o REC
STANDBY
DIGITAL INPUT-2
STANDBY / ON
MEMORY CLEAR REPEAT RANDOM
INPUT TIMER
STEREO
MONO
ANALOG
DIGITAL-1
DIGITAL-2
DIGITAL-3
(COAXIAL)
OFF
REC PLAY
MAXMIN
DISC LOADING MECHANISM
3 DIGITAL INPUTS