Onkyo NCP-302 User Manual

5
EN
0 Be sure to connect the AC adapter to
the unit first, and then connect the
power cord to the outlet. When
disconnecting the power cord, be sure
to press and hold ON/STANDBY for at
least 3 seconds to switch the power of
this unit to standby in advance, and
always disconnect the outlet side first.
0 When the unit is in standby, you can
also press INPUT to turn the power
on.
0 Do not use any power cord or AC
adapter other than the supplied ones.
This may cause a fire or electrical
shock.
0 The supplied power cord and AC
adapter are designed specifically for
the unit. Do not use them for other
devices. This may cause a fire or
electrical shock.

Onkyo NCP-302 Specifications

General

Product color	Black
Volume control	Rotary
Recommended usage	Universal
Multi-Room Streaming (MRS) support	Yes
Speaker type	2-way
Woofer diameter	77 mm
Tweeter diameter	26 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
RMS rated power	- W
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.5 %
Package depth	206 mm
Package width	426 mm
Package height	262 mm
Package volume	3800 cm³
Connectivity technology	Wired & Wireless
Cables included	AC, AUX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	10 W

Weight and Dimensions

Depth	106 mm
Width	320 mm
Height	172 mm
Weight	2600 g