Onkyo NS-6170 User Manual

26
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
E
N
∫ Dig Filter
Select the item with / on the remote controller and press ENTER.
"SHARP" (Default Value): Sound with more structure and firmness
"SHORT": Sound that starts quick and seems to move forward
"SLOW": Soft and fluid sound
∫ Digital Out
Make settings for digital audio output.
Select the item with / on the remote controller and press ENTER.
"On" (Default Value), "Off"
∫ Tuner Setting
System Info
The MAC address of this unit and the current firmware version will be displayed.
Select "MAC address" or "Firmware" with / on the remote controller.
Factory Reset
Reset the settings of this unit to the status at the time of shipment. We recommend that you
take a note of the settings you have changed before going ahead with a factory reset.
To reset, select "Reset Start" with / on the remote controller and press ENTER. Press
ENTER again to start the rest. The unit will be placed on standby automatically when
initializing is completed.
Update
"Update" is not displayed if there are no firmware updates.
∫ via Network
Press ENTER to select when you want to update the firmware via network.
∫ via USB
Press ENTER to select when you want to update the firmware via USB.
Search Level You can choose to have only those FM stations with strong
reception selected when tuning into stations automatically if
tuning regularly stops on FM stations with weak reception.
Select the item with / on the remote controller and press
ENTER.
"Normal" (Default Value)
“Strong" : Select only stations with strong reception.
DAB Scan You can run the auto scan when new DAB stations are added or
when you move house.
DAB DRC
With the DRC (Dynamic Range Control) setting, you can reduce the
dynamic range of DAB digital radio so that you can still hear quiet
parts even when listening at low volume levels - ideal for listening to
the radio late at night when you don't want to disturb anyone.
Select the item with / on the remote controller and press
ENTER.
"0" (Default Value) : DRC off
"1" : Large reduction in dynamic range
"1/2" : Small reduction in dynamic range
NameEdit
(FM stations only)
You can give names to the stations that you have registered. For
details on how to enter text, refer to "Entering text" (P22).

Onkyo NS-6170 Specifications

General

Housing material	Aluminum
Control type	Buttons, Rotary
Package depth	388 mm
Package width	540 mm
Package height	210 mm
Receiver type	stereo
Frequency range	4 - 70000 Hz
Output impedance	75/470 Ω
Dynamic range (1kHz)	114 dB
Audio output channels	2.0 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	115 dB
Total Harmonic Distortion (THD)	0.002 %
Power output per channel (20-20KHz@8 Ohm)	- W
Display	VFD
Platform	Android, iOS
Package type	Box
Apple docking	No
PC connection	RJ-45
Product color	Silver
Audio decoders	Not supported
Volume control	Digital
Number of products included	1 pc(s)
Multi-Room Streaming (MRS) support	Yes
HDMI in	0
Remote (IR) input	2
Ethernet LAN (RJ-45) ports	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, DSD, FLAC, MP3, RA-Lossless, WAV, WMA
Supported radio bands	DAB, DAB+, FM
Preset stations quantity	40
Internet radio services supported	Deezer, Spotify, Tidal, TuneIn
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (typical)	37 W
Certification	CE, WEEE
Package weight	6800 g
Cables included	AC

Weight and Dimensions

Depth	317 mm
Width	435 mm
Height	100 mm
Weight	4500 g