Onkyo TX-8210 - LM7001 (PLL Synthesizer and Controller) Diagram

Basic operations
90 —* 80 —* 70]
Cancel ~—-10 «- 20~
Press the MUTING button on the remote
control.
This button temporarily switches off the
sound from the speakers or headphones.
The AUDIO MUTE indicator will flash.
The muting function will be cancelled if
you:
@ press the MUTING button again, or
@ turn the power off then on.
Stereo headphones with a standard binaural
(stereo) plug can be connected here.
When the headphone plug is inserted, the
speakers are not automatically muted but
can be controlled with the SPEAKERS A/
B buttons.
The sleep timer can power off the system
after a specified time period.
To operate this function, use the remote
control supplied with your amplifier.
1. Start the source playing that you
would like to listen to. (CD, Tape or
radio broadcast)
2. Set the amount of time after which
you want the system to turn off.
The sleep timer works for up to 90 minutes.
You can shorten the timer by 10 minutes
increments by pressing the SLEEP button
until the desired time has been reached.
When the set time comes, the power wil! be
switched off automatically
Press the SLEEP button until it changes to
the source display you are listening to.
or
The timer can also be cancelled while it is
in operation, by turning off the power
13