Onkyo TX-8210 - Specifications; Amplifier Section Specifications; Tuner Section Specifications; General Specifications

Thank you for your purchase of the Onkyo Tuner Amplifier.
Please read this manual thoroughly before making connections and turning on the power.
Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from
your new Tuner Amplifier. Please retain this manual for future reference.
Features
Main Features
M@ Ample Power to Drive Even Large Speakers
Concentrating on sonic performance, Onkyo made sure the
TX-8210 had enough continuous, low-distortion power —
even to drive low-impedance loads. This receiver also boast
plenty of reserve dynamic power for the sudden transient peaks
common with today’s digital sources.
M@ Discrete Output Stage Amplifiers
For impeccable sonic accuracy Onkyo’s engineers called for
discrete amplifiers in the output stage, rather than the less
expensive “package ICs”. The result is enhanced cooling,
proven reliability and superior sonics.
@ 30 Random FM/AM presets and 3-group classifica-
tion
Lets you store your 30 preset stations into three groups and
name the groups.
B RI Compatible Remote Control System Supplied
The supplied remote control operates all major functions. It
also lets the user control the major functions of any Onkyo cas-
sette deck or CD player bearing the FRI mark.
BM RDS (TX-8210R only)
For Radio Data System reception (PS, PTY, RT, TP)
Other Features
M@ Six Inputs (including Tape-1/Video)
M@ 2-Pair Speaker Output Terminals
@ Loudness Control
@ Two-Mode APR (Automatic Precision Reception)
@ Tape-1 to Tape-2 Dubbing
M@ Battery-free Backup
M@ Separate A & B Speaker Selector
M@ Motor Driven Volume Control
@ Direct Access Tuning
B® Automatic FM scanning
@ front Panel Headphone Jack
@ Built-in AM Loop Antenna
M@ Enhanced FL Display
M@ Extra large feet with tri-point configuration for max-
imum vibration damping
M@ Brushed Aluminum Front Panel
@ Audio Muting & Sleep Timer
“WARNING”
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS-
TURE.”
CAUTION:
“TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL.”
Note to CATV system installer:
e This reminder is provided to call the CATV system installer’s
attention to Section 820-40 of the NEC, which provides guide-
lines for proper grounding and. in particular, specifies that the
cable ground shal] be connected to the grounding system of the
building, as close to the point of cable entry as practical.
e For models having a power cord with a polarized plug. |
CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
e Sur les modeéles dont la fiche est polarisée.
ATTENTION: POUR EVITER LES CHOCS ELEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
e@ This apparatus complies with requirements of EC directive 87/
308/EEC.
@ Replacement and mounting of an AC plug on the power supply
cord of this unit should be performed only by qualified service
personnel.
@ IMPORTANT: The wires in the mains lead are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of thts apparatus may
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the termi-
nal which is marked with the letter L or coloured red.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
@ The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “danger-
ous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.