En-16
Using the Listening Modes
Selecting Listening Mode
The listening modes allow you to select the best sound
effect for your input source.
1. After pressing RECEIVER on the remote controller,
press one of the following four buttons.
2. Press the selected button repeatedly to switch the
modes displayed on the display of the unit.
● Set the listening mode of your choice by listening to
the actual sound.
For details on the listening modes see "Listening Mode
Types". For listening modes selectable with each button,
refer to "Selectable Listening Modes".
Listening Mode Types
The unit allows you to enjoy audio in a variety of listening
modes. This section lists the types of listening modes
available on the unit and describes their functions.
¼ Future listening mode update
A future firmware update is planned to enable the unit to
support playback in DTS:X audio format. For this reason,
the available listening modes will vary depending on the
firmware version.
Versions before the release of an update with support for
the DTS:X audio format
● Neo:6 Cinema and Neo:6 Music are available.
Versions that support the DTS:X audio format
● DTS:X and DTS Neural:X are available. (Neo:6 Cinema
and Neo:6 Music become unavailable after the update.)
In alphabetical order
¼ AllCh Stereo
Ideal for background music, this mode fills the entire
listening area with stereo sound.
¼ Direct
In this mode, audio from the input source is output as-is.
For example, if a 2 ch source from a music CD is input, the
output will be stereo, or if Dolby Digital signal is input, the
sound field will be controlled in accordance with the number
of channels present.
¼ Dolby Atmos
Introduced first in the cinema, Dolby Atmos brings a
revolutionary sense of dimension and immersion to the
Home Theater experience. Dolby Atmos is an adaptable
and scalable object based format that reproduces
audio as independent sounds (or objects) that can be
accurately positioned and move dynamically throughout
the 3 dimensional listening space during playback. A key
ingredient of Dolby Atmos is the introduction of a height
plane of sound above the listener.
¼ Dolby D (Dolby Digital)
Mode suitable for playing sources recorded in Dolby Digital.
● This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
¼ Dolby D+ (Dolby Digital Plus)
Mode suitable for playing sources recorded in Dolby Digital
Plus.
● This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
¼ Dolby Surround
Dolby surround is a next generation surround technology
that intelligently up mixes stereo; 5.1 and 7.1 content for
playback through your surround speaker system. Dolby
surround is compatible with traditional speaker layouts,
as well as Dolby Atmos enabled playback systems that
employ inceiling speakers or products with Dolby speaker
technology.
¼ Dolby TrueHD
Mode suitable for playing sources recorded in Dolby
TrueHD.
● This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
¼ DSD
Mode suitable for playing sources recorded in DSD.
● This unit supports DSD signals input through HDMI IN.
However, depending on the connected player, better
sound is possible when output from the PCM output of
the player.
● This listening mode can be selected only if your Blu-ray
Disc/DVD player's output setting is DSD.
¼ DTS
Mode suitable for playing sources recorded in DTS.
● This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
To Next Page
Loading...
General
Weight and Dimensions
