En-28
¼ STEREO button
You can select a listening mode for stereo and all channel
stereo sources.
Input Format Listening Mode
All format
Stereo
AllCh Stereo
1
1
Center speaker, surround speakers or height speakers need to be
installed.
¼ PURE AUDIO button (on the main unit only)
(European, Australian and Asian models)
The display and analog video circuit are turned off to
switch the unit to Pure Audio mode (European, Australian
and Asian models) which provides purer sound. Selecting
this mode lights the PURE AUDIO indicator on the unit.
Pressing the button again reselects the previous listening
mode.
● Selecting Pure Audio for listening mode turns off the
display and analog video circuitry, but the video signals
input through HDMI input are output from HDMI output.
Checking the Input Format
While audio from the player is being input, press DISPLAY
on the remote controller several times to switch the
information shown on the main unit display. For example, if
"Dolby D 5.1" is displayed, the Dolby Digital 5.1 ch signals
are being input.
● The number of channels is not displayed when the input
signal is "Dolby Atmos" format.
To Next Page
Loading...
General
Weight and Dimensions
