To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR828 and is the answer not in the manual?
General| Impedance | 6 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 20 - 20000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 180 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 8 |
| Digital audio coaxial in | 3 |
| Ethernet LAN (RJ-45) ports | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Speakers connectivity type | - |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Ethernet LAN | Yes |
| AM band range | 530 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Product color | Silver |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 720 W |
| THX-certified | THX Select2 Plus |
| Package weight | 18500 g |
Weight and Dimensions| Depth | 398 mm |
|---|---|
| Width | 435 mm |
| Height | 198.5 mm |
| Weight | 15000 g |
Key safety guidelines for installation and use.
Identification of controls and indicators on the front panel.
Explanation of indicators and symbols on the receiver's display.
Identification of rear panel connections and terminals.
How to operate the AV receiver using the remote controller.
Guide to connecting the AV receiver and speaker configuration.
Detailed instructions for connecting speaker cables and powered subwoofers.
Connecting various audio/video devices to the receiver.
Procedures for turning the AV receiver on and off.
Initial setup steps including language, Audyssey auto setup.
Detailed steps for automatic speaker setup and measurement.
Automatic and manual procedures for wireless LAN setup.
Overview of playback functions and screen saver.
Navigating and controlling content from USB and network devices.
Understanding display icons and playing audio via Bluetooth.
Using Quick Setup and the HOME menu for configuration.
Overview of the HOME menu structure and setup items.
Assigning inputs, Monitor Out, Resolution, and speaker setup.
Assigning HDMI inputs and related settings like "Through".
Assigning Component/Digital Audio inputs and speaker setup options.
Detailed settings for speakers, subwoofer, phase, and LFE.
Detailed network setup including DHCP, IP Address, Subnet Mask, Gateway, DNS, Proxy, Network Standby, and Update Notice.
Making multi zone connections and activating Powered Zone 2.
Resetting receiver, and troubleshooting power/audio problems.
Updating firmware via network or USB, including preparation and procedure.
Explanation of HDMI features, audio formats, and HDCP protection.
Summary of technical specifications for key sections of the receiver.
How to enter and look up remote control codes for components.
Assigning codes to buttons and important notes on compatibility.
Steps for assigning codes to remote buttons in different languages.
Steps for assigning codes in Dutch and Swedish.
Steps for assigning codes in Chinese.
