53
Front Panel≫   Rear Panel≫   Remote≫
Contents 
≫
 Connections 
≫
 Playback 
≫
 Setup 
≫
  5.1.4 Channel System
2 1
78
9bk
6
3
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1 
Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be 
combined at the rear dier depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front (  p25)
❏ Combination example when Top Middle Speakers are used at the front (  p27)
❏ Combination example when Front High Speakers are used at the front (  p28)
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front (  p30)
 "Speaker Setup" settings during 
Initial Setup (  p156)
Speaker Setup
< >
Speaker Channels
Subwoofer
Height 1 Speaker
Height 2 Speaker
Zone Speaker
Bi-Amp
5.1.4 ch 
    Yes    
Top  Middle
      Rear High
     No
     No
Select how many speakers you have.
Next
•  Speaker Channels: 5.1.4 ch
•  Subwoofer: Yes
•  Height 1 Speaker: Select the type of 
height speaker actually installed. 
•  Height 2 Speaker: Select the type of 
height speaker actually installed. 
•  Zone Speaker: No
•  Bi-Amp: No