Onkyo TX-RZ730 - Connecting a Power Amplifier

57
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Connecting a Power Amplier
You can connect a power amplier to the unit and use the unit as a pre-amplier
in order to produce a large volume that cannot be output with the unit only.
Connect the speakers to the power amplier. For details, refer to the power
amplier's instruction manual.
• Connect as shown on the left using the PRE OUT jacks.
Setup
• Set "2. Speaker" - "Conguration" - "Speaker Channels" in accordance to the
number of channels for the connected speakers.
a Analog audio cable
a
Power amplier