To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-RZ720 and is the answer not in the manual?
General| Impedance | 6 Ω |
|---|---|
| Receiver type | Surround |
| Frequency range | 5 - 100000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Dynamic power per channel (3 Ohm) | 250 W |
| Dynamic power per channel (4 Ohm) | 220 W |
| Dynamic power per channel (8 Ohm) | 130 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| THX-certified | THX |
| Apple docking | - |
| Product color | Black |
| Audio decoders | DTS-HD, DTS:X, Dolby Atmos, Dolby TrueHD |
| Audio amplifier | Yes |
| HDMI in | 7 |
| USB ports quantity | 1 |
| Digital audio optical in | 2 |
| Bluetooth version | 4.1 LE |
| Bluetooth profiles | A2DP, AVRCP |
| AM band range | 522 - 1710 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM, PLL |
| Preset stations quantity | 40 |
| Internet radio services supported | Deezer, Pandora, Spotify, Tidal, TuneIn |
| Audio formats supported | AIFF, ALAC, DSD, FLAC, WAV |
| Supported video modes | 480i, 480p |
| Headphone connectivity | 6.3 mm |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | 3.5mm |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 600 W |
| Package weight | 13500 g |
| Optical drive included | No |
Weight and Dimensions| Depth | 378 mm |
|---|---|
| Width | 435 mm |
| Height | 177 mm |
| Weight | 10500 g |
Lists all items included with the AV receiver, detailing quantities and types of accessories.
Identifies and describes the buttons, indicators, and ports on the front of the AV receiver unit.
Explains the various indicators and information displayed on the AV receiver's front panel screen.
Identifies and describes all the input, output, and connection terminals on the rear of the AV receiver.
Details the functions and buttons of the included remote control for operating the AV receiver.
Provides a general overview of the steps involved in setting up the AV receiver and connecting components.
Guides on selecting and positioning speakers based on room layout and desired audio configuration.
Explains the setup for a 7.1 channel system, including speaker placement and Dolby Atmos compatibility.
Details setting up 5.1 systems with added height speakers for Dolby Atmos audio.
Explains the setup for 5.1 systems using ceiling speakers for Dolby Atmos overhead sound effects.
Describes 5.1 systems with Dolby enabled speakers for reflected overhead audio, supporting Dolby Atmos.
Explains how to connect front speakers using Bi-Amping for improved bass and treble quality.
Presents a table outlining various speaker channel configurations and their compatibility with Bi-AMP and ZONE 2.
Guides on physically connecting speakers to the receiver using speaker cables and subwoofer cables.
Details the process of connecting front speakers for Bi-Amping, including jumper bar removal.
Illustrates connecting the TV and AV components using HDMI and digital optical cables.
Explains connecting the TV via HDMI (ARC) and digital optical cables for audio return.
Guides on connecting AV components with HDMI jacks, enabling CEC features and HDMI Standby Through.
Details connecting AV components without HDMI using component video, digital coaxial, or analog audio cables.
Explains connecting audio components like CD players and turntables using optical, analog audio, or PHONO jacks.
Describes how to send video from HDMI IN jacks to a TV in a separate room (ZONE 2).
Explains connecting ZONE 2 speakers via pre-main or power amplifiers using analog audio cables.
Details connecting ZONE 2 speakers directly or for ZONE 2A/B (North American models), and audio output conditions.
Covers connecting antennas (AM/FM), Ethernet cable for network, and the power cord.
Guides through the automatic initial setup process for basic configuration using the on-screen wizard.
Explains the automatic room calibration process using the setup microphone to optimize speaker settings.
Guides on verifying and confirming correct connections for each input source.
Details how to set up a Wi-Fi connection, including scanning for networks and entering passwords.
Instructions for configuring multi-zone settings, including AV receiver or external amplifier connections.
Explains how to enable the Audio Return Channel (ARC) feature for TV audio output.
Explains how to play audio and video from connected AV components like Blu-ray Disc players.
Guides on wirelessly playing music from BLUETOOTH enabled devices via pairing and playback steps.
Introduces enjoying internet radio, streaming services, and wireless playback via network connections.
Explains how to play music files stored on a USB storage device connected to the unit.
Guides on tuning into AM and FM radio stations, including automatic and manual tuning methods.
Details how to register up to 40 favorite AM/FM radio stations using the MEMORY function.
Explains how to use the Radio Data System for displaying station names and text information.
Explains how to enjoy audio in a separate room (ZONE 2) and control it using the remote.
Describes various listening modes available for movies, music, and games, and how to select them.
Explains how to view the current input format, listening mode, and signal details on the unit's display.
