35
Using remote controller
Controlling an Onkyo CD player
CD operation
buttons
CD
CD operation
buttons
Tape deck
operation
buttons
RCVR/TAPE
The z connector of the Onkyo compact disc player
must be connected to the TX-SR500/TX-SR500E
(refer to page 16).
1. Press CD.
2. Press to turn on the Onkyo
compact disc player.
3. Press the desired operation button.
s : Starts playback of CD.
e : Stops playback, fast forward or fast
reverse.
f : Fast forwards the CD.
d : Fast reverses the CD.
2/8 : Lets playback pause temporarily.
w : Skips to the beginning of the next
track.
q : Skips to the beginning of the current
or previous track.
DISC : This button is valid when the CD
changer is used and selects the disc to
be played.
1–9, +10, 0 :
Use to enter numeric values.
Controlling an Onkyo cassette tape deck
The z connector of the Onkyo cassette tape deck
must be connected to the TX-SR500/TX-SR500E
(refer to page 16).
1. Press RCVR/TAPE.
2. Press the desired operation button.
s : Plays side A (the side facing the front)
of tape.
e : Stops playback, recording, fast
forward or rewinding.
f : Fast forwards the tape.
d : Rewinds the tape.
2/8 : Plays side B (the side facing the rear)
of the tape.
Tape deck
operation
buttons
RCVR/TAPE
CD
RC-478MRC-479S
RC-478MRC-479S
To Next Page
Loading...
