Onkyo TX-SR507 - Page 83

83
Zone 2—Continued
Adjusting the Volume of Zones
Muting Zones
On the remote controller, press
the [ZONE 2] button, and then
use the VOL [q]/[w] button.
AV receiver
On the AV receiver, press the
[ZONE 2] button (the ZONE 2
indicator and Zone 2 selector on
the display flashes) and then use
the [–]/[+] buttons within 8
seconds.
If your Zone 2 speakers are connected
to a receiver or integrated amp in Zone
2, use its volume control to adjust the
volume.
On the remote controller, press
the [ZONE 2] button, and then
press the [MUTING] button.
To unmute a zone, on the remote
controller, press the [ZONE 2]
button, and then press the
[MUTING] button again.
Remote
controller
Remote
controller