2
Setting the Satellite Radio Mode
Selecting XM Satellite Radio
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first
sign up for an account. You’ll need a major credit card
and your
XM Satellite Radio ID,
which you can get from
the AV receiver, as explained below, or from the Passport
System package and itself.
Notes:
• Channel 0 cannot be selected in Category Search
mode. You must select Channel Search mode (see
page 3).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
1
On the AV receiver, press the
[SETUP] button.
2
Use the TUNING Up and Down
[ ]/[ ] buttons to select “6. SAT
RadioMode,” and then press
[ENTER].
3
Use the PRESET [ ]/[ ] buttons
to select “XM,” and then press
[ENTER].
Pressing the PRESET [ ]/[ ] but-
tons cycles through the following SAT
options: None
↔
XM.
None
: Select if you’re not using sat-
ellite radio.
XM
: Select to use XM satellite
radio.
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAYSTEREO DIMMER MEMORY
DIGITAL
INPUT
TUNING
MODEAB
SPEAKERS
TUNERTAPE
VIDEO
3VIDEO 2VIDEO 1
VCR
DVDMULTI CH C
D
SETUPRETURN
CLEAR
LISTENING MODE
AUDIOLR
VIDEO 3 INPUT
STANDBY/ON
PHONES
TUNING PRESET
ENTER
TUNING
TUNER
SETUP
, PRESET , ENTER
SETUP
TUNING PRESET
TUNING PRESET
ENTER
ENTER
1
Press the [TUNER] input selector
button repeatedly to select XM.
If “CHECK ANTENNA” appears on
the display, make sure the XM Passport
System is connected properly.
1
Use the TUNING Up and Down
[ ]/[ ] buttons to select
channel 0.
Your XM Satellite Radio ID number is
displayed. Write it below.
ID
2
To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
TUNER
Lights up when XM radio is selected.
TUNING PRESET
XM574En Page 2 Tuesday, June 20, 2006 9:07 AM
To Next Page
Loading...
