To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR574 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Outputs | 1 |
| Network Connectivity | No |
| Signal-To-Noise Ratio | 100 dB |
| THD | 0.08 % |
| Input Sensitivity | 200 mV |
| Tuner Type | AM/FM |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Surround System Class | 7.1 channel |
| Digital Sound Processor (DSP) | Yes |
| HDMI Switching | Yes |
| Multi-Room Capability | Yes |
| Input Impedance | 47 k ohms |
| Dimensions (W x H x D) | 435 mm x 174 mm x 377 mm |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Amplifier Output Details | 80 watts per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 channels driven) |
| Response Bandwidth | 10 Hz - 100 kHz |
Important safety and wiring precautions to follow when connecting speakers.
Step-by-step guides for connecting speaker sets A and B, and a powered subwoofer.
Instructions for connecting camcorders, game consoles, and other devices.
Guide to connecting CD players and turntables, including those with phono preamps or MC cartridges.
Details on making RI connections and using functions like Auto Power On/Standby and remote control.
Steps to power the AV receiver on and put it into standby mode.
Key initial configuration steps including digital inputs, speaker setup, and impedance.
Instructions for changing the Input Display for RI-capable components.
How to set the minimum speaker impedance to 4 ohms if needed (North American models).
Procedure to assign component video inputs to input selectors and configure video settings.
Setting speaker sizes (Small/Large), subwoofer presence, and center speaker configuration.
Using the test tone to verify speaker operation and configuration accuracy.
How to select input sources and turn speaker sets A and B on or off.
How to adjust volume and select suitable listening modes for enjoyable sound.
How to display information about the current input source and signal format.
Instructions for selecting and using the multichannel DVD input source for playback.
Connecting headphones and adjusting speaker/headphone levels.
Table showing which listening modes are compatible with different input signal formats.
Descriptions of Dolby Pro Logic IIx, Dolby Digital, Dolby Digital EX, DTS, DTS 96/24, and DTS-ES modes.
How Dolby Digital and DTS sources use PLIIx and DTS Neo:6 for enhanced playback.
Using DTS Neo:6 and Neural Surround for expanded surround sound.
How to use CinemaFILTER to soften soundtracks and Late Night for quiet listening.
Introduction to the audio adjustment settings that affect speaker set A.
How to record selected analog sources and overdub audio from different sources.
Setting crossover frequencies based on speaker size and enabling the Double Bass function.
How to measure and set the distance from each speaker to the listening position.
Procedure for adjusting individual speaker volume levels using the test tone.
Steps to enter remote control codes for controlling other AV components.
Steps to diagnose and resolve issues with no sound or low audio output.
