To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR578 and is the answer not in the manual?
Critical safety warnings and guidelines for operating the AV receiver.
Advice on care, power, handling, and environmental considerations.
Lists all items included with the AV receiver for setup and use.
Instructions on how to install batteries and aim the remote for control.
Details on the receiver's amplifier, processing, connections, and miscellaneous capabilities.
Identifies and explains controls, indicators, and jacks on the front and rear panels.
Guidance on speaker placement for optimal surround sound experience.
Instructions for connecting speakers based on configuration and precautions.
Details on various video and audio signal types and their corresponding jacks.
Instructions for connecting HDMI sources and managing audio return channel.
Guides connection of various front and rear external audio/video devices.
How to connect and use Onkyo RI-capable components for system control.
Instructions for connecting FM and AM antennas for radio reception.
Step-by-step instructions for turning the AV receiver on and off.
Steps for selecting input sources, displaying info, and using Music Optimizer.
How to tune into AM and FM radio stations and store presets.
Overview of the on-screen interface for configuring receiver settings.
Assigns HDMI, Component, and Digital inputs to input selectors.
Configures speaker settings, impedance, and types.
Accesses sound adjustments like bass, treble, multiplex, and mono settings.
Configures settings for each input source, including Audyssey.
Adjusts picture quality settings like Game Mode and Wide Mode.
Assigns default listening modes to specific input sources.
Configures volume limits, power-on volume, and OSD display.
Sets Remote ID, tuner frequency steps, and basic HDMI functions.
Configures advanced HDMI settings and locks setup menus.
Adjusts tone controls, speaker levels, Audyssey, Late Night, and Music Optimizer.
Fine-tunes Cinema Filter, Audio Selector, fixed digital mode, bass, and treble.
Methods for connecting Zone 2 speakers directly or to an external amp.
Configures the 'Front High/Zone2' setting to enable Zone 2 speaker output.
How to turn Zone 2 on/off and select input sources using the AV receiver.
Information on connecting and controlling iPods via Onkyo docks.
Details on RI Dock operation and controlling iPod with the receiver's remote.
Lists preprogrammed codes and procedure to look up codes for other devices.
Step-by-step guide to entering remote control codes for components.
Resets remote buttons/controller and covers TV/Player control.
Explains HDMI interface, supported formats, and copyright protection.
Details on using RIHHD-compatible devices for integrated system control via HDMI.
Addresses issues with power, audio, tuner, video, remote, and component control.
Solutions for tuner, video, remote controller, and other component issues.
Resolves problems with iPod docks, recording, Zone 2, headphones, and RI functions.
Addresses Audyssey setup errors and notes on video playback quality.
Technical details of the AV receiver's amplifier, tuner, connections, and power.
Shows output resolutions supported for HDMI, Component, and Composite inputs.
General
