To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR575 and is the answer not in the manual?
Explains the use of two sets of speakers for different listening areas.
Describes the front panel layout and controls of the AV receiver.
Explains the information displayed on the AV receiver's screen.
Details the rear panel connections for different AV receiver models.
Explains how to use the remote controller and its different operating modes.
Explains how to use the remote for DVD player control.
Explains remote control for CD, MD, CDR, and RI Dock.
Guide to installing batteries in the remote controller.
Instructions on how to aim the remote for optimal signal reception.
Details speaker connection requirements for surround sound systems.
Important safety and connection guidelines for speakers.
Guides for labeling wires and using the speaker terminal tool.
Step-by-step instructions for connecting speaker set A.
Step-by-step instructions for connecting speaker set B.
How to connect a powered subwoofer to the AV receiver.
Instructions for connecting the supplied AM and FM antennas.
Guidance on connecting outdoor antennas for better reception.
General advice before making AV connections.
Details different types of AV cables and their corresponding jacks.
Step-by-step guide for connecting a TV or projector.
Instructions for connecting a DVD player to the AV receiver.
How to connect DVD players with multichannel analog audio output.
Guide for connecting HDMI-compatible components.
Instructions for connecting VCR/DVD recorders for playback and recording.
How to connect camcorders, game consoles, and satellite receivers.
Instructions for connecting CD players and turntables.
Guides for connecting Onkyo RI Docks and audio recorders.
Details on using Onkyo RI components for integrated control.
Instructions for connecting the AV receiver's power cord.
How to turn the AV receiver on and put it into standby mode.
Essential initial configuration steps for smooth operation.
Automatic speaker calibration using the supplied microphone.
Setting minimum speaker impedance for specific models.
Detailed steps for performing the Audyssey 2EQ automatic speaker setup.
Explains potential error messages during automatic speaker setup.
How to manually adjust speaker settings if automatic setup fails.
Tips for using a powered subwoofer with automatic setup.
Setting up video inputs for components like DVD players.
Setting up HDMI inputs for compatible devices.
Configuring digital audio input assignments for optimal sound.
Customizing input selector names for RI-capable devices.
Step-by-step guide to basic operation like selecting sources and volume.
How to view information about the current input source.
Connecting and using components with multichannel audio output.
How to tune into AM and FM radio stations.
Setting the AM frequency step for specific regions.
How to tune directly to stations by entering their frequency.
Selecting and deleting stored radio station presets.
Describes the RDS system and its capabilities.
Lists RDS program types for station searching.
How to display text information broadcast by RDS stations.
How to search for radio stations based on program type.
How to find and listen to traffic news broadcasts.
How to adjust bass, treble, and display brightness.
Temporarily turning off the AV receiver's audio output.
Setting the AV receiver to turn off automatically after a set period.
Adjusting volume levels for individual speakers.
Connecting and using headphones for private listening.
Overview of how to select different listening modes.
Instructions for selecting modes using the remote or receiver.
Explains basic listening modes for different audio types.
Explains Dolby modes for surround sound and digital audio.
Explains DTS modes for digital surround sound.
Explains DTS-ES and Neo:6 for advanced surround playback.
Explains Neural Surround and other Onkyo original DSP modes.
Softens overly bright movie soundtracks for a better listening experience.
Reduces dynamic range for Dolby Digital material at low volumes.
Adjusting audio settings like channel levels and EQ.
Settings for multiplex sources and mono input channels.
Settings for Panorama and Dimension in PLII/PLIIx Music modes.
Adjusting center speaker width and DTS Neo:6 center image.
Specifies the angle of front speakers for Theater-Dimensional mode.
Adjusting subwoofer sensitivity for multichannel DVD input.
How to record selected input sources to a component.
How to overdub audio onto video recordings from different sources.
Checking and manually setting speaker configurations.
Specifying connected speakers and their sizes.
Configuring surround and surround back speaker settings.
Setting crossover frequencies based on speaker size for optimal bass.
Specifying the distance of each speaker from the listening position.
Boosting bass output by feeding front channel sound to subwoofer.
Adjusting the volume level of each speaker.
Adjusting the tone of individual speakers with an equalizer.
How the receiver displays and handles digital input signal formats.
Adjusting audio delay to correct sync issues with video.
How to enter remote control codes to operate other devices.
Lists remote control codes for Onkyo RI-connected components.
How to reset remote control functions to default settings.
Using the remote to control a TV.
Using the remote to control a VCR.
Using the remote to control a satellite or cable receiver.
Troubleshooting power issues like not turning on or shutting off.
Troubleshooting audio problems like no sound or quiet output.
Troubleshooting issues with specific speaker outputs.
Problems related to specific signal formats and playback.
Troubleshooting causes of noise and volume limitations.
Specific troubleshooting for center, surround, and subwoofer outputs.
Problems with specific signal formats and functions like Late Night.
Troubleshooting video issues such as no picture.
Troubleshooting tuner reception issues.
Troubleshooting remote controller functionality.
Troubleshooting issues controlling components and recording.
Other issues like headphone sound, display, RI, and setup errors.
Information on system lockups and memory backup system.
Technical specifications for the amplifier section.
Details on power, dimensions, weight, and other general specs.
List of available video and audio input/output specifications.
Technical specifications for the tuner section.
General
