En-3
Selecting SIRIUS Satellite Radio
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You’ll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
Note:
Your ID is also displayed on the Satellite Radio screen.
See “Positioning the SiriusConnect Home antenna” on
page 9
Selecting SIRIUS Satellite Radio Channels
There are three ways to select SIRIUS Satellite Radio
channels:
1. Channel Search mode: select any channel.
2. Category Search mode: select channels by cate-
gory.
3. Direct tuning: enter channel number.
■ Channel Search Mode
AV receiver
On the AV receiver, press the
[TUNER] button repeatedly to
select “SIRIUS”.
Remote
controller
On the remote controller, press
the [TUNER] button repeatedly to
select “SIRIUS”.
If “CHECK SIRIUS TUNER” appears
on the display, make sure the Sirius-
Connect receiver is connected properly.
If “ANTENNA ERROR” appears,
make sure the antenna is connected
properly.
1
AV receiver
Use the TUNING Up and Down
[q]/[w] buttons to select
channel 0.
Your SIRIUS Satellite Radio ID num-
ber is displayed. Write it below.
ID
2
To sign up, go to:
http://activate.siriusradio.com
Or call: 1-888-539-SIRIUS (7474)
TUNER TUNING /
1
Press the [TUNER] button, and
then press the [ENTER] button
repeatedly to select Channel
Search mode.
This procedure can also be performed
on the AV receiver by using its
[TUNER] button, and [TUNING
MODE] button.
2
Use the Up and Down [q]/[w] but-
tons to select a channel.
You can also use the Left and Right
[e]/[r] buttons to select a category.
TUNER
ENTER
D.TUN
Number
buttons
Channel name
Channel number
To Next Page
Loading...
