Troubleshooting
OontZ Angle 3 PLUS will not turn on
• The battery may have become fully drained. Charge the OontZ Angle 3 PLUS using a USB wall charger from a Smartphone/iPhone or tablet for
at least 15 minutes, then press the power button to turn the speaker on. Then continue charging the battery.
• Reset the OontZ Angle 3 PLUS, follow the reset instructions on page 20.
Cannot pair or connect to the OontZ Angle 3 PLUS
• Check that your OontZ Angle 3 PLUS has a sufficient battery charge, the speaker may not connect when the battery has a low charge. Connect the
speaker to a charging source and try again to pair and connect.
• Your source device may be out of range. Move it closer to within 30 unobstructed feet of your speaker.
• Check the Blue Light to make sure it is flashing. If it is solid blue the OontZ Angle 3 PLUS is already connected to another source device. The
OontZ Angle 3 PLUS can be connected to one source device at a time. You need to disconnect the connected source device then you can connect
to the next source device. Please see instructions on page 8.
• Your source device or the speaker may have a temporary Bluetooth connection issue, please try the following steps which can resolve this:
(continued next page)
Page 15
For the most up to date troubleshooting tips please visit: TheOontZ.com/troubleshooting/oontz-angle-3-plus
To Next Page
Loading...
