Page 22
Using the OontZ app for OontZ Wireless Dual Stereo
Connect two OontZ Angle 3 Pro speakers together - Play your music wirelessly through both speakers up to 100 feet apart.
Refer to Page 14 for more information about OontZ Wireless Dual Stereo
– Turn on one of the OontZ Angle 3 Pro speakers.
– Pair and Connect the speaker with your device. When connected the Bluetooth Button Light will be lit solid Blue.
This speaker will serve as the Play Control Speaker.
– Enable the OontZ app with the OontZ Angle 3 Pro speaker. When the OontZ app is enabled the Play/Pause button Light on the
OontZ Angle 3 Pro will be lit solid Green.
– Turn on the second OontZ Angle 3 Pro speaker.
– The second speaker must not be connected to any device, its Bluetooth Button light needs to be flashing. If the second speaker has a
solid Blue Bluetooth Button Light it is connected to a device and you need to disconnect it by pressing and holding down the
Bluetooth Button for 3 seconds until the Bluetooth Button Light begins flashing.
- Refer to the next page for connecting the two OontZ Angle 3 Pro speakers together with the OontZ app.
To Next Page
Loading...
