– Turn on both OontZ Angle 3 RainDance speakers.
– Pair and Connect one of the speakers with your device. When connected the Blue Light will be lit solid.
This speaker will serve as the Play Control Speaker.
– The second speaker must not be connected to any device, its Blue Light needs to be flashing. If the second speaker
has a solid Blue Light it is connected to a device and you need to disconnect it, by pressing and holding down the
Bluetooth button for 5 seconds until the Blue Light begins flashing.
- On the Play Control Speaker (speaker with solid Blue Light) press and hold down the Play/Pause button
for 5 seconds until the flashing White Light appears and the speaker says “Dual Pairing”.
- After a few seconds the Play Control Speaker will say “Left Channel” and the second speaker will say “Right Channel”
and the speakers will be connected together for Left Channel - Right Channel and you are ready to play.
Connecting two OontZ Angle 3 RainDance Speakers together for Left Channel - Right Channel
Page 14
To Next Page
Loading...
