Oontz Angle 3 - Connecting to Mobile Devices (Step 2); iOS Device Pairing; Computer Pairing

Page 11
Pair & Connect with Your Device -- Step 2 --
- Go to Settings > Bluetooth, check Bluetooth is on
- Select 'OontZ Angle 3 TWS xxx' when it appears under DEVICES (xxx: 3 characters which are unique to your speaker)
- Your device will connect in a few seconds
- The %OXH/LJKWwill turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3
Note: Your Smartphone or Tablet instructions may vary
-- With Your iPhone, iPad, iPod, Smartphone, Tablet & Mobile Devices
-- With Your Apple Mac or Windows Laptop/Computer
For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: 7KH2RQW=FRPSDLULQJ
Important - The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest
volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.