Multifunction Lever Turn and Lane Change Signals
To signal a turn, move the lever all the way up (right) or
down(left). When the turn is over, the lever will return
automatically. To signal a lane change, just raised or
lower the lever until the arrow starts to flash. Hold it
there until you complete your lane change. An arrow in
the instrument cluster will flash in the direction of the
turn or lane change.
Headlamp High/Low Beam Changer
Pull the multifunction lever toward you to select low or
high beam.
Flash-To-Pass Feature
Pull the multifunction lever toward you to operate this
feature.
1-19
To Next Page
Loading...
