Shoulder Belt Height Adjuster
Your vehicle may be equipped with the rear shoulder belt
guides which provide comfort and support for small
adults and children. These guides work by pulling the
regular belt away from the neck and head.
To install the comfort guide:
1 Pull the elastic cord out from between the seat and
inside body of the vehicle and remove the guide
from the chip.
2 Place the guide over the belt, inserting the belt edges
into the slots of the guide.
3 Be sure the belt is not twisted and that the elastic
cord is under the belt and the guide is on top.
NOTICE:
Before you close the door, make sure the safety
belt is out of the way, Otherwise, the belt and/or
the vehicle body could be damaged.
2-7
To Next Page
Loading...
