Composite Headlamps
1. Open the hood.
2. Remove the black protective caps from the
removal pins at the top the radiator support. Use a
hex socket to unscrew the pins.
3. Pull the headlamp lens
assembly out. (Some
vehicles may have
side-by-side bulbs).
4. Unplug the electrical connector.
5. Turn the bulb
counterclockwise to
remove it.
6. Put the new bulb into the headlamp lens assembly
and turn it clockwise until it is tight.
7. Plug in the electrical connector.
8. Put the headlamp lens assembly back into the
vehicle. Install and tighten the screws.
4-20
To Next Page
Loading...
