Opel Blazer - Page 84

Taillamps
1. Open the endgate.
2. Remove the two
screws from the lamp
assembly.
3. Pull the assembly away from the fender.
4. Turn the socket counterclockwise to remove it.
Push the tab in while you turn the socket
counterclockwise.
5. Holding the base of the bulb, pull the bulb straight
out of the socket.
6. Push the new bulb straight into the socket until it
clicks.
7. Put the socket into the lamp assembly and turn the
socket clockwise until it locks in place.
8. Install the lamp assembly and screws.
9. Close the endgate.
4-22