Factory Reset
CONFIGURE > SYSTEM > Factory Reset
You can perform a factory reset, where logs and docker containers are preserved
and everything else is reset to the factory default.
To return the OPERATIONS MANAGER to its factory settings:
1. Select CONFIGURE > SYSTEM > Factory Reset.
2. Read the Factory Reset warning notice.
Warning: This will delete all configuration data from the system and reset
all options to the factory defaults. Any custom data or scripts on the
device will be lost. Please check the box below to confirm you wish to pro-
ceed.
3.
If you still wish to proceed with the reset, Select the Proceed with the factory
reset checkbox.
2. Click Reset.
Warning: This operation performs the same operation as the hard factory
erase button. This resets the appliance to its factory default settings. Any
modified configuration information is erased. You will be prompted to log
in and must enter the default administration username and administration
password (Username: root Password: default). You will be required to
change this password during the first log in.
CONFIGURE MENU 156
To Next Page
Loading...
Need help?
General