Default Settings
The OPERATIONS MANAGER comes configured with a default static IP Address
of 192.168.0.1 Subnet Mask 255.255.255.0.
The OM offers a WebGUI via web browser that supports HTML5.
1. Type https://192.168.0.1 in the address bar. HTTPS is enabled by default.
2. Enter the default username and password
Username: root
Password: default
3. After the first successful log-in you will be required to change the root pass-
word.
4. After log-in, the WebGUI is available. Check system details
5. After log-in the WebGUI is available. Check system details in the top right-
hand side of the WebGUI.
6. In the Navigation Bar on the left side, navigate to the ACCESS > Serial Ports
page. The Serial Ports page displays a list of all the serial devices, including
the links to a Web Terminal or SSH connection for each.
INITIAL SYSTEM CONFIGURATION 22
To Next Page
Loading...
Need help?
General