3.
.
The information bar expands, and the page shows the current status of the active and
inactive SIM cards.
Note: If the unit does not have a cell modem (-L) then the cellular inter-
face will not be visible.
4. The active SIM indicates the color of the signal strength based upon the selected
thresholds in Configure ā SNMP Alerts under the Networking Signal Strength
Alert.
The signal bar color (not the number of bars) indicates signal strength:
l Green if signal is above the higher threshold.
l Orange if signal is between lower and higher threshold.
l Red if signal is below the lower threshold,
l Grey for 0 or not active,
CONFIGURE MENU 65
To Next Page
Loading...