Openpath ACCESS CONTROL SYSTEM - Technical Specifications

Technical Specifications
Table 3: Technical specifications of Openpath hardware
Smart Hub with 12/24V Supply
(OP-SH-24V)
120V, 0.7A or 230V, 0.3A, 50/60 Hz
Smart Reader v2 (OP-R2-STND,
OP-R2-MULL)
12-24VDC, 0.25A @ 12V, 0.12A @ 24V
Smart Readers (OP-RLF-STD,
OP-RHF-STD, OP-RLF-MULB,
OP-RHF-MULB, OP-R2LHF-STD,
OP-R2LHF-MUL)
12VDC, 0.25A
OP-RLF-STD/MULB: FCC ID: 2APJVOPRLF
OP-RHF-STD/MULB: FCC ID: 2APJVOPRHF
OP-R2LHF-STD: FCC ID: 2APJVOPR2LHF
OP-R2LHF-MUL: FCC ID: 2APJVOPR2LHF
4 Door Controller (OP-4ECTR)
10-14VDC, 1A
16 I/O Elevator Board (OP-16EM)
12-24VDC, 0.35A @ 12V, 0.2 @ 24V
4-Port Board (OP-EX-4E)
12-24VDC, 0.4A @ 24V
8-Port Board (OP-EX-8E)
12-24VDC, 0.6A @ 24V
Access Control Core (OP-ACC)
12-24VDC, 0.4A @ 12V, 0.2A @ 24V
Version 1.9
© Openpath 2021
Page 44