Need help?Do you have a question about the Openpath ACCESS CONTROL SYSTEM and is the answer not in the manual?
General| Mobile Access | Yes |
|---|---|
| Cloud Management | Yes |
| Cloud-Based | Yes |
| Remote Access | Yes |
| Multi-Factor Authentication | Yes |
| Real-Time Monitoring | Yes |
| User Management | Yes |
| Encryption | AES-256 |
| Connectivity | Ethernet |
| Credential Types | Mobile, Key Card, PIN |
| Operating Temperature | 0°C to 50°C |
| Power Input | 12V DC |
| Authentication Methods | Mobile, Key Card, PIN |
| Integration | Yes |
| Mobile App | Yes |
| Scalability | Yes |
Lists various data sheets and guides for related hardware and software.
Details site survey requirements like entry count, wiring, and hardware needs.
Specifies Ethernet connection, DHCP, and firewall settings for ACU communication.
Guides on choosing a backup battery based on system power requirements and duration.
Details wiring for the 24V 4-Door Smart Hub using FPV4 power.
Explains how general purpose inputs respond to voltages and their usage with switches.
Guides on connecting third-party Wiegand readers to the Openpath ACU via Smart Reader pigtail.
Details how to change I/O types on 4-Port and 8-Port boards to generic inputs or Wiegand.
Explains the meaning of various LED indicators on Openpath ACUs.
Describes the status indicated by the different LED patterns on Openpath Smart Readers.
Discusses potential issues with legacy wiring and methods to improve connection reliability.
Provides instructions for soft and hard resetting the Access Control Unit (ACU).
Details the process of provisioning ACUs using the Open Admin app or a laptop.
Step-by-step guide to creating an ACU in the Openpath Control Center.
Provides power requirements for first-gen smart hubs and backup battery selection guidance.
Details mounting and wiring the 4 Door Controller in a UL listed system with an El enclosure.
Defines performance levels for 4 Door Controller and Core Series hardware per UL 294 standard.
Outlines FCC compliance rules, interference, and RF exposure requirements for the device.
Warns about RF exposure and installation distance requirements for compliance.
Provides regulations for radio transmitter operation and potential interference reduction.
To Next Page
