Safety 17
Sure Sort™ Operator Manual
OPEX Corporation
2.2. Safety Guidelines
This section provides safety guidelines to be observed when working with this
equipment.
Normal operations - Only authorized personnel shall start, operate, or interfere
with the normal working of the machine. Operator training is required, and
training is provided in “Operation” on page 111
.
Charging rail - Hands should be kept clear of the charging rails when the doors
are closed. Shorting of the charging rails with either a watch or ring may result
in electrical shock.
Do not remove the plastic, protective covers from the bottom of the iBOTs -
The covers protect the iBOT’s ultracapacitors and circuitry from damage. The
covers also protect the operator from harm if the ultracapacitors should leak.
For information on ultracapacitor safety, refer to “Ultracapacitor product
information” on page 60.
Standing under an iBOT - Do not stand under an iBOT while it is carrying a
load. No one may remain underneath iBOTS with loads.
Keep loose objects away from any exposed, moving parts of the machine - The
moving parts of the Sure Sort, such as the conveyor, can become jammed and/
or damaged by foreign objects. Keep hands, hair, loose clothing and jewelry
away from the moving parts.
Conveyor systems - The conveyor system is designed for items that are 5 lbs.
(2.27 kg) or less. Do not sit, stand, or travel on any part of the conveyor system
while it is in motion.
Machine Entry - Do not enter the machine while it is in operation. Only
Authorized service maintenance personnel should enter the aisle.
Machine design - Do not modify the design or configuration of the equipment
without consulting OPEX or your authorized representative.
Follow these safety guidelines whenever operating or maintaining the
equipment described in this manual.
To Next Page
Loading...
