2 modes of alarm trigger:
1- By motion detection. The sensitivity of motion detection can be adjusted (the smaller the
number is, the higher sensitivity is).
2- By external alarm. It triggers according to external alarm signal which connects to
linkage alarm GPIO (not available on OP-CS01).
3 ways of response upon alarm trigger:
-Siren (by external alarm setup)
-Email notification (by sending captured images)
-FTP pictures upload (by uploading images to indicated FTP)
Schedule alarm setting on the time table (select all or choose any time preferred by
clicking on the table).
3.3-7 Record & Capture Path
Login the camera, click >“Local record path".
This sector is for computer use. It includes information about the recording details.
To Next Page