Optex HX-40RAM User Manual

-1-
N219
1
2
3
4
5
INTRODUCTION
1-1 BEFORE YOUR OPERATION 1
1-2 PARTS IDENTIFICATION 2
1-3 DETECTION AREA 2
PREPARATIONS
2-1 TRANSMITTER PREPARATION 3
2-2 BATTERY PREPARATION 4
INSTALLATION
3-1 DETERMING THE DETECTION LENGTH 5
3-2 MOUNTING THE BATTERY 5
3-3 MOUNTING THE TRANSMITTER
AND THE BATTERY BOX 7
3-4 MOUNTING THE BRACKET 8
3-5 ADJUSTING THE VERTICAL ANGLE 9
3-6 WIRING 10
SETTING
4-1 FUNCTION 11
4-2 ANTI-MASKING 13
4-3 AREA ADJUSTMENT 14
SPECIFICATIONS
5-1 SPECIFICATIONS 15
5-2 DIMENSIONS 16
INSTALLATION INSTRUCTIONS
No.59-1547-2
High Mount
Outdoor Detector
High Mount
Outdoor Detector
CONTENTS
By utilizing the OPTEX’s unique pyro-element,
HX series achieves high reliable detection
performance against false and missed alarms.
HX series provides stable and accurate
detection in outdoor severe environmental
conditions.
HX-40RAM: Battery operated model with IR
anti-masking feature.
Installation and connection methods differ
depending on the type and size of the
transmitter battery.
HX -40RAM
HX -40RAM
Warning Warning Caution
INTRODUCTION
1
1-1
Do not repair or modify
product
Keep the product away from
the water
Mount the unit securely
BEFORE YOUR OPERATION
Parallel
2.5 - 3.0 m
(8.3 - 10 ft.)
Tilt
The check ( ) mark indicates recommendation.
The cross ( ) mark indicates prohibition.

Optex HX-40RAM Specifications

General

Coverage Angle	90°
Walk Test Mode	Yes
Wireless	Yes
Type	Passive Infrared (PIR) Detector
Detection Range	12m
Operating Voltage	3-9V DC
Alarm Output	28V DC 0.2A
Tamper Switch	Normally Closed (NC)

Summary

1 INTRODUCTION

1-1 BEFORE YOUR OPERATION

Key precautions and recommendations before operating the product.

1-2 PARTS IDENTIFICATION

Identifies all components and accessories of the HX-40RAM detector.

1-3 DETECTION AREA

Details the detection range and coverage patterns of the device.

2 PREPARATIONS

2-1 TRANSMITTER PREPARATION

Instructions for preparing the transmitter unit for installation.

2-2 BATTERY PREPARATION

Guidance on selecting and preparing batteries for the detector and transmitter.

3 INSTALLATION

3-1 DETERMINING THE DETECTION LENGTH

How to adjust the detection range using masking seals.

3-2 MOUNTING THE BATTERY

Steps for mounting the battery box and installing batteries.

3-3 MOUNTING THE TRANSMITTER AND THE BATTERY BOX

Detailed steps for mounting the transmitter and its associated battery box.

3-4 MOUNTING THE BRACKET

Instructions on how to mount the support bracket for the unit.

3-5 ADJUSTING THE VERTICAL ANGLE

Procedure for adjusting the vertical angle for optimal detection.

4 SETTING

4-1 FUNCTION

Configuration options for various functions like walk test, battery saving, and immunity.

4-2 ANTI-MASKING

Configuration options for the anti-masking feature and sensitivity.

4-3 AREA ADJUSTMENT

Adjusting the detection length and area using masking seals.

5 SPECIFICATIONS

5-1 SPECIFICATIONS

Technical specifications of the HX-40RAM detector, including detection method, range, and power.

5-2 DIMENSIONS

Physical dimensions and mounting details of the HX-40RAM unit.