Optex SMDC-16 - Schedule Programming; Schedule 1 and 2 Configuration; Temporary Schedule Configuration

User’s ManualUser’s Manual
Optex Inc. - 1845 W 205th St. - Torrance, Ca. 90501 - 800-966-7839 SMDC-16 User’s Manual 3440-0250 A3
12 of 16
Programming (continued)
2. Time / Date
Operation:
1. Press PROGRAM.
2. Enter a level 1, 2 or 3 Pin.
3. Press 2 (time / date).
4. Press 1 for date.
5. Enter Date 00/00/00 (your entry will pulsate).
6. Press ENTER and then CLEAR.
7. Press 2 for time.
8. Enter time _ _ : _ _ 0 = AM 1 = PM (your entry will
pulsate).
9. Press ENTER and CLEAR.
Example:
June 3, 1997 enter - 06-03-97
Dec. 25, 1997 enter - 12-25-97
3. Schedules
General Information:
• The Schedules determine if the Auto Arm and Open &
Close Report Codes Suppression functions have been
enabled.
• Check with your alarm company to determine if this
option has been enabled for your security system.
Operation:
Under the Schedule option there are four sub menus that
are selected by pressing the number that corresponds to the
option.
The sub-menus are:
1. Schedule 1.
2. Schedule 2.
3. Temporary Schedule 1.
4. Temporary Schedule 2.
3.1 Schedule 1
Operation:
1. Press PROGRAM and enter your PIN.
2. Press 3 (Schedules).
3. Press 1 (Schedule 1).
4. Select Day of week (1-7).
5. Select 1 - Open Time.
6. _ _ : _ _ AM 0 = am - 1 = pm (entry will be pulsating).
7. Press ENTER and then CLEAR.
(continued)
Programming (continued)
3.1 Schedule 1
Operation:
8. Press 2 Close Time.
9. _ _ : _ _ AM 0 = am - 1 = pm (entry will be pulsating).
10. Press ENTER and then CLEAR.
11. Repeat steps 4 - 10 for each day of week.
12. Press CLEAR repeatedly to return to normal operating mode.
3.2 Schedule 2
Operation:
1. Press PROGRAM and enter your PIN.
2. Press 3 (Schedules).
3. Press 2 (Schedule 2).
4. Select Day of week (1-7).
5. Select 1 - Open Time.
6. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
7. Press ENTER and then CLEAR.
8. Press 2 Close Time.
9. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
10. Press ENTER and then CLEAR.
Repeat steps 4 - 10 for each day of week.
3.3 Temporary Schedule 1
Operation:
1. Press PROGRAM and enter your PIN.
2. Press 3 (Schedules).
3. Press 3 (Temp Sch 1).
4. Press 1 (Date).
5. Enter date (pulsating).
6. Press ENTER and then CLEAR..
7. Press 2 (Open Start).
8. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
9. Press ENTER and then CLEAR.
10. Press 3 (Close Start).
11. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
12. Press ENTER and then CLEAR.
3.4 Temporary Schedule 2
Operation:
1. Press PROGRAM and enter your PIN.
2. Press 3 (Schedules).
3. Press 4 (Temp Sch 4).
4. Press 1 (Date).
5. Enter date (pulsating).
6. Press ENTER and then CLEAR.
7. Press 2 (Open Start).
8. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
9. Press ENTER and then CLEAR.
10. Press 3 (Close Start).
11. _ _ : _ _ AM 0 = am - 1 = pm (your entry will pulsate).
12. Press ENTER and then CLEAR.
(continued on next page)