Service Manual
Manufactured by Bersch & Fratscher GmbH
13
version 10/2008
OPTIMA 2100
17. Declaration of guarantee
Bersch & Fratscher grants a warranty to the following extent for paint spray guns:
The warranty extends to the material values of parts with fabric-malfunctions or material defects, which turn out within the
guarantee period. Those defective parts (excluding wearing parts) are at our choice repaired free of charge or new supplied,
which are substantially impaired in usability, in a time period of 24 months with one-shift operation, 12 months with two-shift
operation or 8 months with three-shift operation starting from delivery date to the end user – in particular because of fabric-
malfunctions- material defects – which are unusable or handicapped in their functionality. That means that we decide, if we
exchange or repair the complete unit or single parts ot this unit. The warranty extends to the materials value of these parts.
Further requirements of any kind, in particular on compensation, are impossible. That applies also to damages, which occurs
during consultation, training and demonstration. If the buyer wishes immediately a repair or replacement, before an obligation
to indemnify was determined in the context of the work warranty, then the replacement or repair takes place against charging
and payment of the respective current market price. If the warranty claim exists, after checking the item, the seller will provide a
credit note for the charged repair job or substituted items. The parts for we supplied a replacement, change into our property,
Claims or other complaints will not authorize the buyer and/or orderer to refuse or retard the payment.
Returning of the claimed item has to take place to us free of charges. We cannot cover assembly costs (work time and travel
costs) as well as freight and packing costs. Here our assembly conditions apply.
We do not take over any warranty for damages which caused by the following reasons or were along-caused:
Unsuitable or inappropriate usage, incorrect assembly and/or initial start-up by the buyer or through third persons or parties.
Normal wear, incorrect treatment or maintenance, use of force, damage by third parties or by contaminant, damage by ignoring
of the users manual, interferences and changes in the product, unsuitable coating material/spraying materials, exchange
materials and chemical, electro-chemical or electrical influences, if the damage is not caused by us.
Grinding coatings /-spraying materials like e.g. Menninge, dispersions, glazes, liquid emery, zinc-rich paints etc. reduce the life
span of valves, packings, spray guns, nozzles, cylinder, piston etc.
Wear which can be led back on that is not covered by this warranty.
Components, which were not built by B&F, are subj ect to the original manufacturer warranty.
The exchange of suche a part does not extend the guarantee period of the equipment. The warranty expires with influences by
third-parties.
The equipment is to be examined immediately after receipt.
Claims must be advised to us in written form within 14 day s after receipt of the equipment under indication of the model
description and the serial number.
We reserve the rights to fulfill the warranty by a partner company. The achievement of this warranty depends on the proof of
the invoice. If the warranty claim validly made by the warranty taker is not confirmed, the repair invoice goes to the buyer.
Additionally the buyer has to refund all costs by not entitled claims to the manufacturer . This declaration of guarantee does not
place a restriction of the legal and/or. the requirements agreed upon contractually by our general delivery conditions.
Stockholm 08-629 07 00
Härnösand 0611-214 63
Karlstad 054-10 15 40
Malmö 040-18 70 22
Göteborg 031-779 73 30
www.anti-corrosion.com
To Previous Page
Loading...