OPTIMUM 600M // 1
WELCOME TO YOUR NEW KITCHEN ASSISTANT
Congratulations on purchasing your professional quality Optimum 600M Cold Press Juicer.
The 600M Cold Press Juicer can be used to create your favorite juices, smoothies, and purées using
fruits and vegetables.
TO ENSURE YOUR SAFETY AND TO GET THE BEST PERFORMANCE FROM YOUR OPTIMUM
600 MINI COLD PRESS JUICER, PLEASE READ THESE INSTRUCTIONS CAREFULLY.
SAFETY FIRST
WHEN USING ELECTRICAL APPLIANCES, YOU SHOULD ALWAYS BE AWARE OF
AND FOLLOW BASIC SAFETY PRECAUTIONS INCLUDING:
1. Read and follow all instructions and warnings in this manual carefully.
2. To protect against the risk of injury due to electric shock, do not immerse the Optimum 600M Cold
Press Juicer in water or any other liquid.
3. Only connect the appliance to a grounded power outlet. Always make sure the power plug is
inserted into the power outlet properly.
4. The input voltage of this appliance is between 220-240V, at 50-60Hz. Ensure the power source is
compatible with the appliance before connecting it, to avoid damage.
5. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are supervised or have
been given instruction concerning the use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
7. Do not operate the juicer if the power cord or plug are damaged, or if it malfunctions or is damaged
in any way. Return the appliance to the nearest authorized service facility for inspection or repair. Do
not attempt to repair the appliance yourself, to avoid the risk of injury.
8. Do not operate the appliance with wet hands.
9. If you have any issues operating the juicer, first refer to the Troubleshooting section. If the problems
persist, contact the distributor and return the appliance for inspection or repair. Do not disassemble
the juicer yourself.
10. To avoid injury, unplug the power cord from the power outlet before assembling, disassembling,
cleaning or putting your hands near any moving parts of the appliance.
11. Ensure the detachable parts of the appliance are installed properly before use. The pulp extractor
and feeding chute should be in the ‘lock’ position to prevent leakage, spillage, or parts from
becoming loose during juicing.
12. Place the appliance on a flat, stable and level surface, away from any water or heat sources. Do not
use the appliance on carpets, towels, plastic, paper, or flammable surfaces.
To Next Page
Loading...
