Monitoring Blood
ß-Ketone
3
At the end of the
countdown:
•If the beeper is ON, listen for
the beeper.
•The blood ß-Ketone result
shows on the display window
with the word KETONE.
•The result is stored in your
monitor’s memory as a blood
ß-Ketone result.
Shutting Off Your Monitor
1
Removing the electrode
from the electrode port
turns off the monitor. You
can use the opened foil
packet to remove and
discard your used electrode.
2
Discard the electrode
properly.
Note: You may also turn the
monitor off by Pressing and
Holding the button. If you
do not turn your monitor off or
pull the electrode out, the
monitor shuts off automatically
after 60 seconds.
51
To Next Page
Loading...