Control Solution
Testing
63
Note: If you are doing a
ß-Ketone control solution test,
KETONE will also show with
the result.
•The result is stored in your
monitor’s memory as a
control result.
Shutting Off Your Monitor
1
Removing the electrode
fr
om the electrode por
t
tur
ns of
f the monitor. You
can use the opened foil
packet to remove and
discard your used electrode.
2
Discard the test
strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the button. If you
do not turn your monitor off or
pull the electrode out, the
monitor shuts off automatically
after 60 seconds.
To Next Page
Loading...