English
36
USING THE PROJECTOR
Level 1 Level 2 Level 3 Level 4 Level 5 Value
Personalize
Input Source Setup
Auto
HDMI
AV
NO Signal Auto
Shutdown
On
Off
Software Update
Net update
Local update
About
Regulatory Model LDMLSSZ
System Version 4.4.4
Wireless MAC
address
by Model
Cable MAC address by Model
Memory Information
(or/total)
by Model
Software Version by Model
Hardware Version by Model
Note:
*
1
Options are available only if “Security” in “WIFI” > “Wi-Fi hotspot” > “Cong wi hotspot” menu is set
to “WPA2 PSK” or “WPA PSK”.
*
2
Options are available only if “Through the network to be automatic gain time date” parameter in
“System” > “Date time setting” menu is “Off”.
Select the input source manually
You can congure the projector to detect the input source automatically (please refer to page 28) or set the input
source manually. To set the input source manually, do the following:
1. Tap the , , , or key to select either the “HDMI” tab or the “AV” tab.
2. After selecting the tab, tap the key to set the input source.
Note: If the input source cannot be found, you are prompted to return to Android menu (Home screen).
Select the “OK” option and tap the key to conrm.
To Next Page
Loading...
Need help?
General
