Optoma TX612 - Page 34

34
English
User Controls
Setup | Security
Pass-code default
value is “1234”
(rst time).
Change Password

First time:
1. Press “ ” to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new
password and then press “ ” key to conrm your
password.

Change Password:
1. Press “ ” to input old password.
2. Use number button to enter current password and then
press “ ” to conrm.
3. Enter new password (4 digits in length) using the number
buttons on the remote, then press “ ” to conrm.
4. Enter new password again and press “ ” to conrm.

If the incorrect password is entered 3 times, the projector will
automatically shut down.

If you have forgotten your password, please contact your local
ofce for support.