Optoma TX612 - Direct Power on

37
English
User Controls
OPTIONS |
Advanced
Direct Power On
Choose “On” to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the “ ” key on the projector control panel or on the
remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has nished (in
minutes).
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has nished (in
minutes).
Power Mode (Standby)

Eco.: Choose “Eco.” to save power dissipation further < 1W.

Active: Choose “Active” to return to normal standby and the
VGA out port will be enabled.
This disables
VGA out when
the projector
is in Power
Mode (Standby)
as Eco..