If the USB adapter cable is connected this port
is marked as [Infrared Thermometer Adapter].
D
EVICE SETUP
The menu item [Menu: Device\ Setup] opens a
dialog window for setup of the following
parameters: Emissivity, Alarm, Temperature
unit, Display backlight, Laser, Buzzer.
S
TARTING A MEASUREMENT
You can start a measurement by pressing the
START button in the tool bar:
[Menu: Measurement\ Start].
S
TOP MEASUREMENT/ SAVE
The S
TOP button will finish the current
measurement [Menu: Measurement\ Stop].
optris MS – DE2011-04-A
33
To Next Page
Loading...
