Oracle Database Appliance X7-2M Service Manual

Install a Boot Drive
Caution - Equipment damage. Close the door after removing a boot drive to prevent
overheating due to improper airflow.
Install a Boot Drive
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes installing a boot drive in Oracle Database Appliance Version 1.
1.
Determine the drive slot location for the replacement drive.
Drives are physically addressed according to the slot in which they are installed. See “Storage
and Boot Drive Locations” on page 153 for drive locations.
2.
Pull open the rear drive door.
158 Oracle Database Appliance Service Manual • November 2017

Oracle Database Appliance X7-2M Specifications

General

Brand	Oracle
Model	Database Appliance X7-2M
Category	Storage
Language	English