Replace a Storage Shelf Power Supply (CRU)
4.
Once installed, the system should automatically detect and use the replacement
drive. Ensure that the green OK indicator for the replacement drive lights to
show that the drive is ready.
This can take a few minutes to complete.
Replace a Storage Shelf Power Supply (CRU)
The storage shelf and the storage expansion shelf each have two power supplies. Indicators
(LEDs) on the power supplies indicate their operation state.
The power supplies are redundant and one can be replaced while the appliance is running.
Example showing a DE3-24C power supply:
90 Oracle Database Appliance Service Manual • November 2017
To Next Page
Loading...
Need help?
General